Automation Continuous Build Continuous Integration Testing With Selenium Webdriver

Selenium Continuous Integration with Jenkins using GIT

In this post, I am trying to keep complete guide of Selenium Continuous Integration (End to End Integration) with Jenkins. This is a guide to implementing Continuous Integration with Jenkins, Maven, and TestNG with GitHub. There are lots of tools and techniques that can be integrated in a CI environment. Here I am using Selenium WebDriver, Java, TestNG, Maven, and I integrate these with Jenkins. To implement continuous integration, follow the 9 steps which I mentioned below.

• 1. What is Continuous Integration
• 2. What is Maven
• 3. Building A Maven Project In Eclipse
• 4. What is GIT
• 5. What is Jenkins
• 6. Installation of Jenkins
• 7. Configuring Jenkins for a Maven Project
• 8. Configure GIT Plugin in Jenkins
• 9. Running Maven Project From Jenkins

What is Continuous Integration

Continuous Integration is abbreviated as CI. Continuous Integration is a development practice which aims to make sure the correctness of a software. After each commit, a suite of tests run automatically and tests a software to ensure whether the software is running without any breaks. If any test fails, we will get immediate feedback say "build is broken".

In simple words, continuous integration is a process of verifying the correctness of a software.

Some of the continuous integration tools are Jenkins, TeamCity, Bamboo, Travis, CircleCi, Bitbucket, CruiseControl

What is Maven

Maven, a Yiddish word meaning "accumulator of knowledge". Maven is a build automation tool used primarily for Java projects. It helps in building software, it describes how software is built and it describes its dependencies. It dynamically downloads Java libraries and Maven plug-ins from one or more repositories such as the Maven 2 Central Repository, and stores them in a local cache. We use maven in Selenium as a build tool or project management tool. It helps in managing all project dependencies and ensure an easy build process.

Main Objectives of Maven are as follows:

• Making the build process easy
• Providing a uniform build system
• Providing quality project information
• Providing guidelines for best practices development
• Allowing transparent migration to new features

So far we have learned what is Continuous Integration and what is Maven. If you are sitting at your system and trying to implement then let's get started to implement the below mentioned 9 Steps.

STEP 1: Open your Eclipse IDE to start building a maven project

Building A Maven Project In Eclipse

Installing Maven Project in Eclipse:

STEP 2: Installing Maven in Eclipse: Check this link

So, now we have Maven installed in Eclipse. Now let's create Maven Project in Jenkins.

Creating Maven Project In Jenkins:

STEP 3: Create a new Maven Project in Eclipse – Follow below steps

3.1 To create a project – Right click on Package Explorer and navigate through New – Other

Make sure TestNG is already installed. Check this out to see "How To Install TestNG In Eclipse" and this check this link for "TestNG Complete Tutorial"

SelectMaven Projectand click onNext

Select 'Create a simple project' checkbox and clickNext Fill theGroup Id, Artifact Id and click theFinish button

Structure of the project looks as shown in the below image

3.2 Configure pom.xml  file, that was automatically created, to include other plugin jars to the build process. It can be found in the root of the Maven project as shown in the below image.

In the maven project, we use POM file to add the required dependencies. Double click on pom.xmlfile and click onpom.xml tab

Add the below maven dependency (Selenium and TestNG) to allow maven to download the necessary jars for your project.

< dependencies > < !-- Selenium --> < dependency > < groupId > org . seleniumhq . selenium </groupId > < artifactId > selenium-java </artifactId > < version > 2.53.1 </version > </dependency > < !-- TestNG --> < dependency > < groupId > org . testng </groupId > < artifactId > testng </artifactId > < version > 6.8 </version > < scope > test </scope > </dependency > </dependencies >

3.3 Adding TestNG jars to the dependency will enable TestNG in your project.

Create a TestNG classand generate  testng.xml  file. Check the below link to do this step.

How to create a TestNG class and generate testng.xml file

Copy the below code and place it in yourNewTest class

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

package tests ; import org . openqa . selenium . WebDriver ; import org . openqa . selenium . firefox . FirefoxDriver ; import org . testng . annotations . Test ; import org . testng . annotations . BeforeClass ; import org . testng . annotations . AfterClass ; public class NewTest { public WebDriver driver ; @ Test public void openMyBlog ( ) { driver . get ( "https://www.softwaretestingmaterial.com/" ) ; } @ BeforeClass public void beforeClass ( ) { System . setProperty ( "webdriver.gecko.driver" , "D:\\Selenium\\Drivers\\geckodriver.exe" ) ; driver = new FirefoxDriver ( ) ; } @ AfterClass public void afterClass ( ) { driver . quit ( ) ; } }

testng.xml:testng.xml file looks like below. Copy and place it in your testng.xml

<? xml version="1.0" encoding="UTF-8" ?> < suite name="Suite" parallel="false" > < test name="Test" > < classes > < class name="tests.NewTest"/> </classes > </test > < !-- Test --> </suite > < !-- Suite -->

To run the project usingtestng.xml, right click on 'testng.xml' file and go to Run As – TestNG Suite

3.4Adding 'maven-compiler-plugin' and 'maven-surefire-plugin' to the pom.xml file

To run the project using pom.xml, we need to add some more entries in the pom.xml file. We need to add 'maven-compiler-plugin' and 'maven-surefire-plugin'

pom.xml

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

< project xmlns="http://maven.apache.org/POM/4.0.0" xmlns : xsi="http://www.w3.org/2001/XMLSchema-instance" xsi : schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd" > < modelVersion > 4.0.0 </modelVersion > < groupId > mavenPackage </groupId > < artifactId > MavenProject </artifactId > < version > 0.0.1-SNAPSHOT </version > < dependencies > < !-- Selenium --> < dependency > < groupId > org . seleniumhq . selenium </groupId > < artifactId > selenium-java </artifactId > < version > 2.53.1 </version > </dependency > < !-- TestNG --> < dependency > < groupId > org . testng </groupId > < artifactId > testng </artifactId > < version > 6.8 </version > < scope > test </scope > </dependency > </dependencies > < build > < plugins > < plugin > < groupId > org . apache . maven . plugins </groupId > < artifactId > maven-compiler-plugin </artifactId > < version > 3.6.1 </version > < configuration > < source > 1.8 </source > < target > 1.8 </target > </configuration > </plugin > < plugin > < groupId > org . apache . maven . plugins </groupId > < artifactId > maven-surefire-plugin </artifactId > < version > 2.20 </version > < configuration > < suiteXmlFiles > < suiteXmlFile > testng . xml </suiteXmlFile > < !-- < suiteXmlFile > src/main/resources/testng . xml </suiteXmlFile > --> </suiteXmlFiles > </configuration > </plugin > </plugins > </build > </project >

Note: The build process will build your Maven project and run the base testng.xmlduring a Maven test. Once you have setup Maven and downloaded all the corresponding jars, right click on the project and go to run  – Maven Clean  and then try install & build. If you're able to build/clean/install your Maven projects then you have successfully installed/configured Maven.

What is GIT

Git is the most widely used modern version control system in the world today for tracking changes in any set of files. Git is an open source project. It is aimed at speed, data integrity, and support for distributed, non-linear workflows. It allows you to commit your work locally and then sync your copy of the repository with the copy on the server.

STEP 4: Install GIT in Eclipse and Adding (Uploading) Maven Project to GitHub

Here is a video tutorial on "How To Install GitHub in Eclipse and How To Upload Project to GitHub":

Please be patient. The video will load in some time.

What is Jenkins

Jenkins is an open source automation server. It supports us to automate all sorts of tasks related to building, deploying and automating any project. It is cross-platform and can be used on Windows, Mac OS, Linux etc., As a part of Selenium, we use it to build and test our software continuously. It is used for automatic test executions and scheduled builds. Using Jenkins we could also publish results and send email notifications to all the team members. Jenkins provides continuous integration and continuous delivery service for software development.

Here is the official link to Jenkins documentation.

So far we have installed Maven, created Maven Project in Eclipse and installation of GIT in Eclipse and uploading Maven Project to GitHub. Also, we learned what is Continuous Integration, Maven, GIT, and Jenkins. Now we will install Jenkins and configure it.

Installation of Jenkins

STEP 5: Install Jenkins – Check this link

Earlier we published a post on installation of Jenkins, see this post on how to install Jenkins

Configuring Jenkins for a Maven Project

STEP 6: Configuring Jenkins for a Maven Project – Check this link

Earlier we published a post on configuring Jenkins for a maven project, see this post on configuring Jenkins for a maven project

So far we have installed and created Maven Project in Eclipse, Installed and uploaded Maven Project to GitHub and installed and configured Jenkins for Maven Project. Now we will configure GIT plugin in Jenkins.

Configure GIT Plugin in Jenkins

STEP 7: Configuring GIT Plugin in Jenkins – Follow below steps

7.1Go To Manage Plugins –> Filter list of plugins available with 'Git Plugin'.

Read more on Git Plugin

7.2Check the Git Plugin and click on the button 'Install without restart'

In the below screenshot, you could see that I have already installed it.

7.3 After the installation is done, restart Jenkins by using the command in the browser. http://localhost:8080/jenkins/restart

Once Jenkins is restarted, Git option should be available under Source Code Management when configuring a job in Jenkins and this we will see in Step 8.

7.4 Go to Manage Jenkins –> Configure System, please provide the right Path to Git executable

STEP 8: Create Maven Project in Jenkins and build a job from Git Project – Follow below steps

We have configured GIT plugin in Jenkins. Now let's create a Maven Project and build a job from Git project

8.1 Click on New Items –> Enter Project Name (say GitProject) –> Select Freestyle Project –> Click OK

You will be redirected to the Configuration page. Click on Source Code Management Tab

8.2 In Source Code Management, Select 'Git' option. (This should be visible once you have successfully installed Git Plugin – Which we have done in Step 7.3).

8.3 Give your Git Repository URL (which we have captured in Step 4 – Watch video on how to Create Repository in Git and Copy the Git Repository URL) and choose your Credentials and save your changes

Jenkins will pull the project's source code from the remote Git Server based on the Repository URL which we have passed.

8.4 In Build – click on Add build step and choose Invoke top-level Maven targets and pass 'clean install' as Goals. Click on Advanced button and pass POM value as 'pom.xml'

Note: Under Git Plug-in, Set the global git user.name and user.email to match your global config options

Also, you could pass Post-build actions to generate reports. To generate TestNG HTML reports, choose Publish TestNG reports by clicking on Add post-build action and pass value as '**/testng-results.xml'

And finally, click on Save.

Learn how to configure simple maven project in Jenkins

Jenkins Continuous Integration Project Structure in Eclipse looks as shown below:

Running Maven Project From Jenkins

STEP 9: Executing Maven Project From Jenkins – Follow below steps

Let's execute it now.

9.1 Click on 'Build Now' link. It will invoke the pom.xml .

9.2 Right click on Build Number (here in my case it is #1) and click on Console Output to see the result.

You could see Build Status 'Success' on Console Output.

Also, you could Schedule Jenkins jobs and send an email notification after build run.

For scheduling Jenkins job:

Open your Jenkins job – Configure – Build triggers – Select Build periodically checkbox and enter your Cron job pattern

For example: To run your job every minute, you need to enter * * * * *

Jenkins works on Cron pattern. Learn more about the Cron job pattern – wiki link

For sending email notification:

Go to Manage Jenkins – Configure – Select Email notification – Set SMTP configuration.

You will receive an email notification whenever the build passes or fails.

Conclusion:

Selenium Continuous Integration with Jenkins allows us to run our scripts on each deployment. Jenkins allows us to save execution history and reports. I hope this post assisted you in achieving your goals. Hope you have successfully implemented Selenium Continuous Integration. Please do not hesitate approaching if you have any questions.

Here are a few hand-picked articles for you to read next:

• How To Run Selenium Scripts Using BrowserStack
• Learn Cross Browser Testing Tool
• Complete Guide – GUI Automation Tool – Froglogic Squish
• Most Popular – Selenium Interview Questions
• TestNG Interview Questions
• Why You Choose Software Testing As A Career
• General Interview Questions

Rajkumar SM is a founder of SoftwareTestingMaterial. He is a certified Software Test Engineer by profession and a blogger & a YouTuber by a choice. He has extensive experience in the field of Software Testing. Furthermore, he loves to be with his wife and a cute little kid 'Freedom'.

williamsoberthe.blogspot.com

Source: https://www.softwaretestingmaterial.com/selenium-continuous-integration/